Nelsonian Posted September 11, 2011 Share Posted September 11, 2011 Still hoping that you would seriously consider making the top steering column clamshell with a centered, rounded 2-1/16" gauge provision for a boost or air/fuel gauge, with turn signal indicators for those of us that have changed to aftermarket speedo/tach's. Quote Link to comment Share on other sites More sharing options...
rnye Posted September 12, 2011 Share Posted September 12, 2011 (edited) I'd like to see carbon kevlar parts for the S30. Hood/ZG flares/spoiler. Also, you guys should start offering some different "universal" S30 parts - Diffusors, gauge holder (custom center stack to replace OEM HVAC/Radio/etc), etc. I love the look on my Brides! These are for the S30 - would love some matching parts. Edited September 12, 2011 by rnye Quote Link to comment Share on other sites More sharing options...
LanceVance Posted September 12, 2011 Share Posted September 12, 2011 Still hoping that you would seriously consider making the top steering column clamshell with a centered, rounded 2-1/16" gauge provision for a boost or air/fuel gauge, with turn signal indicators for those of us that have changed to aftermarket speedo/tach's. +1 (I could live without the turn signal indicators) Quote Link to comment Share on other sites More sharing options...
dum-bass Posted September 12, 2011 Share Posted September 12, 2011 I like the idea of the door skins. A few other nice things would be; CF side mirrors CF sugar scoops Custom CF center consoles to accept extra switches and gauges CF A-piller pod gauges that actually fit correctly And of course CF dashs I second that! Quote Link to comment Share on other sites More sharing options...
ZT-R Posted September 19, 2011 Share Posted September 19, 2011 Rear diffuser would be awesome. As far as bang for your buck, i would do a pillar gauge pod. NO ONE makes one that fits. I would like to see -Dash (maybe with 1 more gauge in the center?) -Center Console -Doors. not just skins, lets ditch our rust depositories while we are at it -1 piece fender/headlight buckets -Side skirts like below. (well i will have to upload that later, i dont have the pic on this computer) but it is a rust color z with black wheels and has a very clean sideskirt on it that goes on the door, fender and rear quarter. Quote Link to comment Share on other sites More sharing options...
kj280z Posted October 16, 2011 Share Posted October 16, 2011 I'd personally like to modernize the entire interior. All interior plastic panels modified to give the car a modern "factory" look... Console, door panels (already in progress), rear plastic side panels with speaker pods... Ect ect ect Quote Link to comment Share on other sites More sharing options...
Wedge Posted October 17, 2011 Share Posted October 17, 2011 I would jump on a roof skin RIGHT NOW... make them! Quote Link to comment Share on other sites More sharing options...
Robzzzz Posted October 26, 2011 Share Posted October 26, 2011 (edited) I know it's not a new idea but is anybody running anything like these ? http://www.carbonfibergear.com/weds-sport-full-carbon-fiber-wheel/ Edited October 26, 2011 by bobzzzz Quote Link to comment Share on other sites More sharing options...
spitsnaugle Posted October 26, 2011 Share Posted October 26, 2011 (edited) I know it's not a new idea but is anybody running anything like these ? http://www.carbonfib...on-fiber-wheel/ Forgeline wheels here in dayton was making prototypes CF wheels. Last I knew Dave (the owner) considered them too unstable to use. I'd really really like to see a vented 280z hood in CF or fiberglass, all I've seen is the 240z. Or even one like Mark Rolston's Z. Edited October 26, 2011 by spitsnaugle Quote Link to comment Share on other sites More sharing options...
ZT-R Posted November 6, 2011 Share Posted November 6, 2011 How about some side skirts like this? Quote Link to comment Share on other sites More sharing options...
Zinger Posted July 11, 2012 Share Posted July 11, 2012 (edited) Bump. Anybody actually come up with anything good? Earlier I saw someone mention a glass alternative? What's this versus carbon fibre? Wouldn't it just shatter because it's... Uhh, glass? Lol And Kevlar. Mmmm. Kevlar would be amazing!! Edited July 11, 2012 by Zinger Quote Link to comment Share on other sites More sharing options...
Administrators RTz Posted July 11, 2012 Administrators Share Posted July 11, 2012 Fiberglass Quote Link to comment Share on other sites More sharing options...
LanceVance Posted July 11, 2012 Share Posted July 11, 2012 There is a solution for CF/Fiber glass air dams - clear bra. If you want to keep the paint on your air damn this stuff is pretty amazing. 3M is one of the better product out there but there are others. Works with cones too +1 I've got the entire front end of my STI done, (Subaru paint is notoriously prone to chipping) and it still looks factory fresh after many offload excursions! Quote Link to comment Share on other sites More sharing options...
8DC Posted July 11, 2012 Share Posted July 11, 2012 How about a smooth rear panel to replace the one with all the holes when we go bumperless? Maybe offer them with different exhaust cutouts or a rear diffuser (could reduce some of the fumes). Quote Link to comment Share on other sites More sharing options...
cobramatt Posted August 27, 2012 Share Posted August 27, 2012 How about some side skirts like this? The car pictured does not have side skirts???? are you referring to the flares? Matt Quote Link to comment Share on other sites More sharing options...
spitsnaugle Posted August 27, 2012 Share Posted August 27, 2012 The car pictured does not have side skirts???? are you referring to the flares? Matt It does have side skirts, they just are very subtle/stock looking, basically just extending the body down a bit. Quote Link to comment Share on other sites More sharing options...
ZT-R Posted August 27, 2012 Share Posted August 27, 2012 Thats correct. At first glance it doesn't look like it does, but it does. Quote Link to comment Share on other sites More sharing options...
75zcar Posted September 12, 2012 Share Posted September 12, 2012 I looooove those sideskirts.^ Quote Link to comment Share on other sites More sharing options...
OldAndyAndTheSea Posted September 12, 2012 Share Posted September 12, 2012 Dash, Center Console, and Door Panels!!!! Also liking the idea of quarter windows replaced with CF vents instead. Quote Link to comment Share on other sites More sharing options...
Dan Juday Posted September 12, 2012 Share Posted September 12, 2012 Still hoping that you would seriously consider making the top steering column clamshell with a centered, rounded 2-1/16" gauge provision for a boost or air/fuel gauge, with turn signal indicators for those of us that have changed to aftermarket speedo/tach's. +2 Just tell me where to send the check. I'm also up for replacements for the interior plastic trim panels. And the rear interior quarter panels with the vapor tank bump removed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.