Jump to content
HybridZ

Search the Community

Showing results for tags '280Z'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical
    • FAQs
    • Model Specific
    • V8 Z Forums
    • 6 Cylinder Z Forums
    • Other Engines
    • Engine Components
    • Body Kits & Paint
    • Windtunnel Test Results and Analysis
    • Brakes, Wheels, Suspension and Chassis
    • Drivetrain
    • Fabrication / Welding
    • Interior
    • Miscellaneous Tech
    • Trouble Shooting / General Engine
  • General
    • Announcements
    • Non Tech Board
    • New Members Forum
    • Members Projects
    • Motorsports / Events
    • Buy / Sell / Trade
    • Group Buys
    • Vendor's Forum
    • Links
    • Site Support

Blogs

  • Blog 7794
  • Blog 7796
  • Blog 7797
  • Blog 7801
  • Blog 7810
  • Blog 7821
  • Blog 7850
  • Blog 7876
  • Blog 7900
  • Blog 7903
  • Blog 7918
  • Blog 7945
  • Blog 7995
  • Blog 8097
  • Blog 8113
  • Blog 8124
  • Blog 8199
  • Blog 8217
  • Blog 8223
  • Blog 8239
  • Blog 8335
  • Blog 8424
  • Blog 8478
  • Blog 8501
  • Blog 8644
  • Blog 8751
  • Blog 8853
  • Blog 9074
  • Blog 9088
  • Blog 9095
  • Blog 9152
  • Blog 10389
  • Blog 10579
  • Blog 10681
  • Blog 10929
  • Blog 10956
  • Blog 11195
  • Blog 11737
  • Blog 11794
  • Blog 11853
  • Blog 12120
  • Blog 12435
  • Blog 12884
  • Blog 13129
  • Blog 13159
  • Blog 13200
  • Blog 13472
  • Blog 13567
  • Blog 13587
  • Blog 14207
  • Blog 14439
  • Blog 14625
  • Blog 14703
  • Blog 14909
  • Blog 14919
  • Blog 14975
  • Head Gasket for 3.1 liter stroker engine
  • Blog 15298
  • Blog 15393
  • Blog 15520
  • Blog 15602
  • Blog 15654
  • Blog 15717
  • Blog 15865
  • Blog 16224
  • Blog 16227
  • Blog 16485
  • Blog 16662
  • Blog 16809
  • Blog 16878
  • Blog 16923
  • Blog 17059
  • Blog 17103
  • Blog 17116
  • Blog 17333
  • Blog 17402
  • Blog 17506
  • Blog 18026
  • Blog 18084
  • Blog 18466
  • Blog 18819
  • Blog 19188
  • Blog 19475
  • Blog 19671
  • Blog 19685
  • Blog 20165
  • Blog 20200
  • Blog 20239
  • Blog 20330
  • Blog 20345
  • Blog 20475
  • Blog 20568
  • Blog 20611
  • Blog 20767
  • Blog 20885
  • Blog 21113
  • Blog 21316
  • Blog 21355
  • Blog 21400
  • Blog 21541
  • Blog 21630
  • Blog 21672
  • Blog 21712
  • Blog 21925
  • Blog 21950
  • Blog 22036
  • Blog 22272
  • Blog 22312
  • Blog 22331
  • Blog 23034
  • Blog 23042
  • Blog 23220
  • Blog 23246
  • Blog 23322
  • Blog 23406
  • Blog 23570
  • Blog 23700
  • Blog 23718
  • Blog 23737
  • Blog 23762
  • Blog 23794
  • Blog 23917
  • Blog 23956
  • Blog 23959
  • Blog 24064
  • Blog 24131
  • Blog 24139
  • Blog 24205
  • Blog 24221
  • Blog 24240
  • Blog 24430
  • Blog 24435
  • Blog 24495
  • Blog 24576
  • Blog 24643
  • Blog 24722
  • Blog 24770
  • Blog 24833
  • Blog 24848
  • Blog 24853
  • Blog 24872
  • Blog 25030
  • Blog 25248
  • Blog 25289
  • Blog 25373
  • Blog 25396
  • Blog 25527
  • Blog 25674
  • Blog 25853
  • Blog 25886
  • Blog 25922
  • Blog 25986
  • Blog 26129
  • Blog 26181
  • Blog 26217
  • Blog 26240
  • Blog 26247
  • Blog 26299
  • Blog 26401
  • Blog 26440
  • Blog 26559
  • Blog 26735
  • Blog 26736
  • Blog 26831
  • Blog 26844
  • Blog 26883
  • Blog 26884
  • Blog 27002
  • Blog 27028
  • Blog 27169
  • Blog 27260
  • Blog 27267
  • Blog 27307
  • Blog 27345
  • Blog 27400
  • Blog 27428
  • Blog 27452
  • Blog 27558
  • Blog 27622
  • Blog 27707
  • Blog 27735
  • Blog 27877
  • Blog 28049
  • Blog 28070
  • Blog 28199
  • Blog 28214
  • Blog 28234
  • Blog 28308
  • Blog 28320
  • Blog 28475
  • Blog 28476
  • Blog 28494
  • Blog 28657
  • Blog 28671
  • Blog 28814
  • Blog 28880
  • Blog 28923
  • Blog 28943
  • Blog 28945
  • Blog 28982
  • Blog 28993
  • Blog 29008
  • Blog 29036
  • Blog 29168
  • Blog 29412
  • Blog 29467
  • Blog 29618
  • Blog 29710
  • Blog 29759
  • Blog 29832
  • Blog 29868
  • Blog 29922
  • Blog 29950
  • Blog 30009
  • Blog 30027
  • Blog 30175
  • Blog 30182
  • Blog 30287
  • Blog 30302
  • Blog 30339
  • Blog 30443
  • Blog 30461
  • Blog 30474
  • Blog 30517
  • Blog 30556
  • Blog 30654
  • Blog 30729
  • Blog 30758
  • Blog 30773
  • Blog 30842
  • Blog 30872
  • Blog 30886
  • Blog 30989
  • Blog 31027
  • Blog 31048
  • Blog 31073
  • Blog 31109
  • Blog 31116
  • Blog 31138
  • Blog 31251
  • Blog 31307
  • Blog 31343
  • Blog 31378
  • Blog 31393
  • Blog 31432
  • Blog 31495
  • Blog 31507
  • Blog 31592
  • Blog 31626
  • Blog 31643
  • Blog 31692
  • Blog 31717
  • Blog 31760
  • Blog 31768
  • Blog 31777
  • Blog 31826
  • Blog 31851
  • Blog 31877
  • Blog 31907
  • Blog 31942
  • Blog 32009
  • Blog 32051
  • Blog 32073
  • Blog 32094
  • Blog 32111
  • Blog 32142
  • Blog 32169
  • Blog 32198
  • Blog 32250
  • Blog 32256
  • Blog 32259
  • Blog 32262
  • Blog 32291
  • Blog 32371
  • Blog 32417
  • Blog 32463
  • Blog 32515
  • Blog 32519
  • Blog 32562
  • Blog 32678
  • Blog 32695
  • Blog 32725
  • Blog 32981
  • Blog 33294
  • Blog 33517
  • Blog 33612
  • Blog 33734
  • Blog 33993
  • Blog 34018
  • Blog 34140
  • Blog 34452
  • Blog 34586
  • Blog 34855
  • Blog 35117
  • Blog 35378
  • Blog 35742
  • Blog 35956
  • Blog 36022
  • Blog 36030
  • Blog 36711
  • Blog 36997
  • Blog 37069
  • Blog 37070
  • Blog 37103
  • Blog 37166
  • Blog 37257
  • Blog 37645
  • Blog 37818
  • Blog 37954
  • Blog 38369
  • Blog 38569
  • Blog 38681
  • Blog 38923
  • Blog 38945
  • Blog 39122
  • Blog 39441
  • Blog 39494
  • Blog 39529
  • Blog 39575
  • PSL_240z's Blog
  • Phlebmaster's Blog
  • dhp123166's Blog
  • miguel240zcruz's Blog
  • dsalni's Blog
  • dsalni's Blog
  • beon's Blog

Categories

  • Configuration File Sharing
  • Drawing Files, Templates
  • Manuals, Diagrams, Guides
  • Software, Calculators
  • Other misc files

Product Groups

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

  1. What's up everyone, I am going to be swapping a LS1 engine along with a tr6060 transmission into my 1975 280Z. This is my first time doing a full engine swap, so it should be a fun time (hopefully). I'll be posting progress pics as I go along with the project. My plan is to have the car running by this summer of 2023. It's currently April 26 soo no pressure lol. I hope this thread can be another resource to anyone doing a similar swap. I plan on being as thorough as I possibly can!
  2. I was trying to fabricate a bracket for the 280z front brakes to mount a wilwood caliper, but need to throw in a slightly larger Diameter rotor to be able to put the wilwoods on. The stock 77 280z rotor measures 10.8" in diameter and I am not able to find any larger rotors that fit the 4 lug design and offsets. Is anyone in the group aware of a rotor with a larger diameter but carrying the 4 lug pattern? The offsets can be managed with some spacers, but I would like to keep the 4 lug pattern. I looked at the 300zx vented rotors, but look like they're the same diameter as the stock 77 rotors. I'm looking for something around 11.2" or larger Thank you!
  3. I am not a mechanic at all, i am just a 19 yo who started liking cars and likes building things, so bear with me if some terminology or methodology is wrong Hello, I'm in a bit of a crisis with my car at the moment, and before I get told to do this, yes I have spent days searching the internet, and yes I have looked through the FSM for this model year of the 280z, and spent many days looking through the wiring diagrams trying to solve this problem. A little backstory for this project of mine: My grandpa has had this car for about 30ish years now sitting on his property. I recently took an interest in the car and was starting to get into cars in general. So he decided to let me try to restore the car with him. I should mention the car had been stripped of all components for a full restoration that 30 years ago. so I started on the car approximately 2-3 months ago now, and am almost ready to start, and paint the car, and get it road ready. Onto my electrical problems: So after I got every electrical connection together through the entire car, we plugged in a new battery to start testing the electrical components. Right off the start there were issues but not too many, the engine would crank fine but we didn't have gas so we don't know if it would have started or not. but as i have been trying to solve the problems with the electrical, i accidently shorted a ground pin to the main headlight pin in a connection while light testing and since then, the headlights don't work, and the flashers don't work. The fuses are fine none blown, and the fusible links are fine, they all get continuity & voltage through them. I have replaced the flasher relay and it didn't change anything, I have cleaned all the connections in the combination switch circuits. Then when I was testing the ignition switch, I accidently cranked the engine, and my negative to chassis ground cable instantly melted. Ever since then the positive terminal of my battery, has continuity to the chassis of the car, the engine and every single ground contact/cable throughout the car. Another thing, I'm not sure if this is normal or not, but in my fuse box, the left side of my fuel gage fuse (blue wire) has continuity with the positive terminal of my battery. Things i have tried to trace the problem so far: I have taken off all the important relays for operation and opened them, checked for any damage, and cleaned them. I have been checking all my fuses and fusible links constantly to make sure its not them. I did notice today, that when I unplug the fusible link in the picture, my positive terminal loses ground to the entire car, which has led me to believe its something to do with that cable. Any help would be apprieciated
  4. Apologies, I included a special character in my last thread title and it corrupted the page. I can’t seem to delete it, sorry! See repost below ———————————————————— Hey all, Hope you’re good. I’ve been browsing the HybridZ forums a bit but I’ve not managed to find anything specific to the swap that I’m doing. I have a LHD 1977 280z and a 2JZ-GTE VVTi and not sure whether to mate with either a T56 Magnum F or a CD009. Please feel free to direct me to a thread which can answer what I’m outlining below! These would be my two options both brand new. Grannas T56 Magnum F kit or the Collins/Autosports/SerialNine CD009 adapter kits.. Gear T-56 F CD009 1st 2.66 3.78 2nd 1.78 2.32 3rd 1.30 1.62 4th 1.00 1.27 5th 0.80 1.00 6th 0.63 0.79 I’m based in West Sussex, UK with a LHD 1977 280Z. Lots of twisty roads and sharp turns round here... Not really too fussed about cruising and fuel economy as this will not be a daily. I’ll be looking to build my Z primarily for spirited driving and to be able to take on track occasionally. I will be doing a single turbo conversion and looking to push around 500-600 bhp max. I have to say I am leaning more towards the CD009 because of parts availability, it is also cheaper too. But will need some work done to fit in the tunnel nicely, so I’ve read. My indecision is when it comes to drivability. I’m really stuck between both CD009 and T56 Magnum F (close ratio version) and what would be better suited to what I want to build the car for based on the conditions above (I guess for the type of roads over here and the tracks we have, shorter gears are better?) I’m also quite unsure on which diff I should go for that will get the most out of whatever transmission I decide on. Do you guys have any thoughts as to what is the best pairing would be for the 2JZ in terms of transmission and diff? Can I stick with the long nose R200? Or do a SN R200 conversion, 8.8 conversion… etc. Just trying to really narrow down those options too. There are a few bits that’s I’ve read about each transmission but I haven’t managed to find technical pros and cons/justifications that is specific to my chassis and swap. I’m not sure how much of that information I can take to crossover with my build so I just would rather ask to make sure. Please let me know if you need any more info from me! Thank you very much. Raman
  5. Hey all, Hope you’re good. I’ve been browsing the forums a lot but I’ve not really seen anything specific to the swap that I’m doing. I have a 280z and a 2JZ-GTE VVTi and not sure whether to mate with either a T56 Magnum F or a CD009. Please feel free to direct me to a thread which can answer what I’m outlining below! These would be my two options both brand new. Either Grannas T56 MF kit or the Collins/Autosports CD0009 adapter kits.. I’m based in the UK with a LHD 1977 280Z. We don’t really have any long stretched roads in the area that I live in - lots of twisty roads and sharp turns let’s say. Not really too fussed about cruising and fuel economy as this will not be a daily. I’ll be looking to build this primarily for street and to be able to take on track occasionally. I will be doing a single turbo conversion and looking to push around 500-600bhp max. I’m really stuck between both CD009 and T56 MF and what would be better suited to what I want to build the car for based on the conditions above (I guess for the type of roads and possibly track, shorter gears are better?) I’m also quite unsure on which diff I should go for that will make the most out of whatever transmission I decide on. Do you guys have any thoughts as to what is the best pairing would be for the 2JZ in terms of transmission and diff? Can I stick with the long nose R200? Or do a SN R200 conversion, 8.8 conversion… etc. There are a few bits that’s I’ve read about general pros and cons on another forum but haven’t managed to find technical pros and cons/justifications that is specific to my chassis and swap. I’m not sure how much of that information I can take to crossover with my build so I just would rather ask to make sure. I’m sure I will gain some insight here from you knowledgeable people! Please let me know if you need any more info from me! Thank you very much. SS
  6. I have two brand new in box Tokico Illumina adjustable struts p/n BZ3099. These are for the Toyota MR2 1987-89, but have been popularly used in sectioned struts for the 240, 260, 280Z. I bought these several years ago and never installed them and now my 280Z project has taken a different turn, and I will no longer be needing these. I will only sell both together for $250. Buyer pays shipping from Zip 29303. Please do not request a shipping quote unless you accept the purchase price already. I will need a few days to box these properly and securely including adding packing material to protect these parts for you before I can get the quote from UPS. I am attaching an article I printed from HybridZ forum many years ago that explains the sectioning in case you can't find it here doing a search. Strut sectioning.pdf
  7. Hello everyone. I'm going to jump right in. I just installed a new motor. Fully stripped of emissions except charcoal canister. Cold start delete. Bcddd deleted and plugged. EGR delete. All new vacuum lines. New plugs E3's /wires MSD 7mm. New fuel pump (95psi) regulated to 35psi on rail, and filters before and after. Clean grounds. New battery, starter, alternator. Clean connections on injectors. All injectors were bench tested and contacts cleaned w/ new gaskets. Vacuum tested @ 17. New Fidanza flywheel installed with exedy clutch. The issue: Car starts right up strong. Will rev to 3k decent. If I hammer throttle it backfires out the exhaust. I have played with the AFM because both units I have already been played with. I have calibrated one using the guide on Atlanticz.ca and everything went well. On reinstall, the car would not start. I had to tighten the clock spring on afm for it to run again. Now it is soo tight I am afraid to go any further. If I hold extra tension on the AFM it runs beautiful and smooth to 6.5k easy. What else can/should I do to correct this issue? Open to all suggestions.
  8. Introducing our first product to hit the market is our 1971-1978 LED Emblem turn signal kit. Each kit is hand made at our shop in Las Vegas, NV. Our kit is a plug n play harness kit that integrates LED turn signals into the pillar emblem. Installation is easy and we even have a tutorial video posted to our YouTube channel. To order you can visit our website https://harmonresto.com/ or send a DM to our Instagram page! https://www.instagram.com/harmonresto/
  9. Alright so i have an automatic 1978 280z that i wanna convert to manual. However everywhere i look it talks about getting a manual pedal box, my question is do i have to source a manual pedal box or is there even a difference in the automatic and the manual besides the clutch pedal? Also can i just buy a clutch pedal and attach it to the pedal box i already have? And are there any other alternatives to this, for instance if i can find a manual pedal box or attach a clutch pedal, is there any after market ones that’ll work like wilwood or something? Thank you
  10. I'm trying to diagnose a few things on my 75 280z 2+2, and I'm wondering if they might be related. Any help would be appreciated. Also, does anyone know why the section of my camshaft above cylinder #2 is red? Video. In summary, I can't seem to get power out of my engine. It used to run "great", but now I can barely get the car over 30mph. I ran a compression test, fearing a blown head gasket, but though the readings aren't great, I would have expected to get over 30mph with them (1: 170, 2: 156, 3: 167, 4: 169, 5: 160, 6: 165). That #2 cylinder seemed especially low, so I ran it with a tsp of oil in the cylinder, and no change - still 156. My vacuum is measuring low at about 13 in of Hg. I replaced all the old vacuum tubing, but it's still running low, even with most subsystems' vacuum lines blocked off. Fuel is spraying well out of all injectors. Fuel pressure is at 38 psi with the fuel pump on, but engine off, then drops down to ~30 psi when idling. Using a timing light, I adjusted the distributor til the engine was at exactly 10 degrees by the timing mark. I lashed the valves back in the day at cold, but I definitely hear a clicking from the engine that I don't love. Based on that and everything above, I imagined that I must have just screwed up the lash, so I opened the valve cover and checked, but no, the lash was exactly where I left it. So I don't know. Any pointers, ideas, or other debug steps would be appreciated. And yeah, if anyone knows why that section is red on the camshaft, I'd love to know! Thanks everyone. Valves in action
  11. And so the story begins... My son and I were talking about a project to do together. My friend Larry has been building and racing Z cars for many years and his wild enthusiasm was infectious. So we started casually searching for a car. We were looking for a 240 but couldn't be happier about what we found, given all that we've since learned in the process. I was looking on Craigslist and there she was, a '77 280Z in Reno. This was late October 2017 and I think the seller was asking $2000. I forwarded the post to my son, who lives in Reno, to see what his reaction would be. He drove over to the seller's house immediately and looked it over pretty carefully (or so it seemed) and called me up. We talked about it and he offered $1500 with no title, and the seller accepted. So we took a leap of faith and purchased our project car. I rented a trailer and drove up the next day, loaded her up, and took her back to our shop in Gardnerville, NV. It was apparently all original, with 93k miles and a sticker on the license plate from 1993. The seller had found it covered in dust in back of his friend's shop and similarly couldn't resist the temptation. He was planning to get it running, but it ended up just sitting in his garage, undriveable. There was a small box of parts in the back, with license plate from Alabama, with a sticker from '93l. We did a title search and 1993 was the last issued registration for the car. Alabama is known as the easy place to get a replacement title, but the starter had a sticker from a motor rebuild shop, in Alabama and we discovered later that the EGR port on the intake manifold was disabled by packing it with mud that could only have been from Alabama. At the time of the purchase, Nevada had made it the responsibility of the civil courts to award vehicle titles... oh boy. While not impenetrable, we were not looking forward to going through a court procedure for old Donna. Miraculously, two months later it was announced that, come July, it would once again be the responsibility of the Nevada DMV to award vehicle titles. As it should be! After a bit of back and forth with the Title Research Department we were awarded a bonded title. And a good thing too as we had already stripped her down by that point (more on that later). Something tells me there is no way we would've found a car like this for $1500 bucks if the seller had known he could've nabbed a title for it so easily only a few months later. Timing is everything! The seller also knew things about the car that we had not yet discovered. We weren't entirely sure how far we were going to go with it but have ended up on a fantastic journey, much much more to come. Here she is, as we found her:
  12. I am in the research phase of my 280z build and have been going back and forth between the Arizona Z Car Track Pack and Techno Toy Tunings Packages that match ACZs offerings. The overall plan is the build my suspension and brakes to be strong and able to do anything I throw at it, whether it’s auto cross, track days or daily driving. I will be going with a LY6/T56/R200 drivetrain. I know there are threads that talk about both techno toy and AZC but I haven’t seen any definitive pros or cons to either kit and I would love to know if anyone else has gone through this and where you landed.
  13. MODS: I apologize, should this be moved to Member Projects? Unoriginal, I know. Blasphemous, for sure; wouldn't have it any other way. I just wanted to pop in with the standard "Long time lurker" introduction. I've been trying to restore a Z for the past year and half, which has ballooned way over my head in what surprises a 40+ year old Datsun has in store for an unsuspecting hobbyist. It started off with buying a running, seemingly decent condition 280z which was to be a joint project for my girlfriend and me. We were going to do right by the car, keep it simple and just restore it. As we started to peel back the layers, that all started to change. Feb-April 2019 The car ran! Only had two owners, came with a lot of documentation and detailed sheet of when/what was done with all corroborating receipts. The guy literally tracked running hours on engine rebuild. It did start puffing a bit and he was forthcoming and stated it needed a head gasket. We start cracking away and the next set of photos you're all familiar with.... We got a quote on rebuilding the head and it came out to over $1000 since the components are hard to come by or custom. Looking at engine options through Datsun Spirit, who are local, just destroyed so much of the budget. Especially now that we had to battle the unseen cancer... We just started to tear everything apart. Sadness ensued. The best part of the car
  14. Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Question 2. I have a problem with my car it cranks but it doesn’t start. it has new ngk spark plugs (got them at Amazon) it was backfiring and saw some smoke coming out by the headers so I changed the valves covers and headers gaskets, new battery, the fuel pump is a red Holley and it sounds that it’s working (as it’s very loud) I cleaned the fuel hoses with air pressure . used starting fluid and it just cranks but it doesn’t start. I was told that it could be the started but as it cranks I searched up and found out that if it cranks the starter works.what ever it’s going on it’s drying out the battery, I had some alarm expert lol from a local alarm shop near my place and paid a lot because they had to remove the old alarm system and put a new one, the old one stopped working and i couldn’t turn it off, and it was working fine before, even he broke my steering wheel column cover. but all this thing happened when all the crazy stuff about the pandemic and couldn’t get in touch with them, so I am screwed there. Anyway I narrow things down, The fuel pump is loud and there is fuel in the carburetor, I bought a performance tool w86553 Ignition Tester and there’s no power on the spark plug tester, I checked on 3 spark plug cables, so I was looking at the hatch connector and shows some rust I cleaned but still doesn’t work, Should I buy a new distributor ? If so which one do you recommend? The car was turning on without a problem, I twisted the distributor a little to the left (counterclockwise) and turned back as I saw some antifreeze by the left rear bolt next to the distributor so I don’t know if that could be one of the reasons. I didn’t know that affects the timing.I am categorized as disabled, and been working on my Z, Had to deal with cancer and had something like a stroke and had to remember or relearn some stuff, spend over a year down and 6 months in the hospital so no much $ and my oldest son is helping me with the hard work.c found the spark plugs about $5 bucks cheaper on amazon and that’s why I bought them In case some one ask why I bought them on Amazon 😅lol Do you guy have any idea what it could be?
  15. Hello guys again, Question number 1: can I change the brake vacuum reservoir hoses without compromising air getting in to the brakes fluids? It has edelbrock 60739 heads,1406 carb, performer 2101 manifold for reference. Question 2. I have a problem with my car it cranks but it doesn’t start. it has new ngk spark plugs (got them at Amazon) it was backfiring and saw some smoke coming out by the headers so I changed the valves covers and headers gaskets, new battery, the fuel pump is a red Holley and it sounds that it’s working (as it’s very loud) I cleaned the fuel hoses with air pressure . used starting fluid and it just cranks but it doesn’t start. I was told that it could be the started but as it cranks I searched up and found out that if it cranks the starter works.what ever it’s going on it’s drying out the battery, I had some alarm expert lol from a local alarm shop near my place and paid a lot because they had to remove the old alarm system and put a new one, the old one stopped working and i couldn’t turn it off, and it was working fine before, even he broke my steering wheel column cover. but all this thing happened when all the crazy stuff about the pandemic and couldn’t get in touch with them, so I am screwed there. Anyway I narrow things down, The fuel pump is loud and there is fuel in the carburetor, I bought a performance tool w86553 Ignition Tester and there’s no power on the spark plug tester, I checked on 3 spark plug cables, so I was looking at the hatch connector and shows some rust I cleaned but still doesn’t work, Should I buy a new distributor ? If so which one do you recommend? The car was turning on without a problem, I twisted the distributor a little to the left (counterclockwise) and turned back as I saw some antifreeze by the left rear bolt next to the distributor so I don’t know if that could be one of the reasons. I didn’t know that affects the timing.I am categorized as disabled, and been working on my Z, Had to deal with cancer and had something like a stroke and had to remember or relearn some stuff, spend over a year down and 6 months in the hospital so no much $ and my oldest son is helping me with the hard work.c found the spark plugs about $5 bucks cheaper on amazon and that’s why I bought them In case some one ask why I bought them on Amazon 😅lol Do you guy have any idea what it could be?
  16. Hello guys, I am having a headache trying to find out all the correct information about my engine. There are other people trying to fin out by using the casting numbers by the back of the engine but looks like the number has a printing error, I know it’s a 350 5,7, but I would like to know exactly what I have. does anyone has a good idea of how can I get all the information about my engine? Year? What vehicle was originally from? Hp, etc I need parts and the auto parts always give me issues as they need the year or model of my vehicle. I can’t tell them athat I have a Datsun 1975 with a sbc lol, Any help will be appreciated. I am opening another discussion to explain the issues. Thanks for your support, we can do “diy“ because we help each other. In a Chevy forum they replied telling that this is the engine information, How do I know to what vehicle it came from, or at list a vehicle for me to use when ordering parts
  17. I've looked through the FSM, my Haynes manual and searched forums on multiple sites. I can't identify this part on top of the thermostat housing and where the hoses are supposed to be attached. Any help is appreciated. Thanks!
  18. *Finally getting around to documenting my build. Will continue to update the text as I go. Happy to answer any questions. Feel free to also follow along on instagram for more frequent updates. I fell in love with the S30 chassis at around the age of 13 and tried to buy one or two as my first car. Unfortunately, being from the north east, anything I could afford had rust holes in structural areas you could put your hand through. After watching the price trend over the last few years, I decided I better act before I missed the boat. -Purchased sight unseen in October, 2018 from another member here. -The car started it's life in California, was shipped to Florida by the P.O., and then I shipped it back to California. I was living in Germany at the time, so the plan was to store it with my family and make trips to work on it whenever I found the time. -I purchased it as a roller since I'd always planned to do a swap anyway. It came with a lot of T3 and AZC suspension bits already in place, most of which I sold.
  19. Hey all. So I have had my 1977 280z for around 7 years now. Drove it for a couple when I first bought it. Started having issues with the L-Jet system. Spent a while troubleshooting but the more I fixed the more I found items that needed fixing. Ended up moving into an apartment, then bought a house, sold the house, etc. barely worked on it for a few years. My now fiance and I bought a farm house with a big ole workshop (about 2500sqft, 3 bays, 1 dumptruck bay) and I got back into making my dream car just that. I decided now was the time to do it right. My Z had rotted floors, rotted frame rails, rotted fenders, rotted firewall. tons and tons of structural rot. Good thing I am a welding and metallurgical engineer and have plenty of fabrication equipment and experience (I hope). I cut out both floors, the firewall on the passenger side, fender well, and patched the "torque box" area of the frame in front of the firewall...one panel at a time. Most of these welds have been gas backed or flux shielded, or copper backed. Derek Macheski provided the floor support rails for my build (I think hes on here somewhere) as a partial trade for my motor. I am pairing my Z up with a Ford 5.0 small block V8. The donor vehicle was a 2001 mercury Mountaineer which means this is the highest performance factory 302W offered but also brings up some challenges; 1: The heads are GT40P heads which requires special or custom headers. The only headers currently manufactured that fit correctly are long tubes which will not fit the S30 engine bay. 2: The upper and lower intake are quite tall and require the engine be mounted somewhat lower in addition to possible hood clearance modification. 3: The engine is returnless and distributorless and I will be using the factory EFI harness and ECU, tuned with protune and probably a Moates QH chip. The current state of the build: I have completed most of the fabrication work, a few odds and ends that need to be finished but nothing major. I have the engine, transmission, and headers all in the vehicle and everything seems to fit. I am currently working on thinning the EFI harness of all unnecessary equipment using an old factory electrical schematic and some help from the folks over at the explorer forums.
  20. Hi If anyone on here has previous experience or has undertaken such a project I would be grateful for their advice and help in the following. I am building a street able and possibly a light competition car. Something to have fun with. What I imagine is a high revving, very responsive engine with uprated brakes and suspension and a stiffened chassis. I am looking for around 180 to 200 wheel horsepower. The type of car that is not stupidly quick, but something that you can rev out and enjoy pushing through the bends and enjoy through the whole rev range. Not an all out track car with all the power at the top end. I have built a few projects my self and am looking to build the engine myself. At the moment I have my 280z with the stock L28 engine with stock EFI system. I have got it running but don't like the way the engine performs. It seems to have a bit of torque but is sluggish/lazy. It is not a free revving, spirited engine. This could be because it has lost its performance as its old and has an out dated EFI system but from what I have read the L28 is a long stroke engine so not high revving and responsive. This has led me to consider, from what I can see are the 3 options. I want to keep the car naturally aspirated. 1. Rebuild my L28 and increase compressing as from research its a low compression motor. Also add triple Webbers and some cylinder head work (CAM etc.) I am not to hopeful as from what I can tell the L28 is a long stroke engine so even after this work it wont be high revving and will not be very responsive. Also the stock 5 speed gearbox does not seem great for this application. 2. Source an RB25DE as I want to keep the car naturally aspirated. From my research these engines rev higher and make about 150 wheel horsepower. So with this engine I may get away with a simple refresh and possibly some cylinder head work, cams etc to squeeze a bit more power out of it. I will need new mounts, prop shaft, wiring loom etc. 3. Source an RB26 and turn it into a naturally aspirated engine just like Sung Kang's build. This seems to be the more expensive option rather than the RB25. I have done some research and it seems in order to raise the compression of the RB26 I would need to install high compression pistons and stronger rods, change the CAMS, New springs and possibly port and polish the head. I would want to produce an engine that has performance through the rev range though and not all at the top end. I will also need a wiring harness kit, new sump to fit the S30 chassis, ECU and prop shaft made. I calculated this all to cost, including the purchase of the engine and gearbox (RB25 gearbox) to be about £7k if I build it my self. So if anyone has any experience in this it would be great to hear their opinion and what they have done. Many thanks Paul
  21. I couldn't be any happier to announce that I have my 1978 Datsun 280z back in my possession after all these years. Way back when I was only eighteen years old, I had an amazing cousin that introduced me to Datsun's and specifically the S30 Series. At the time he owed a couple Z's. One with an LS swap and the other with a turbo kit. Once I experienced the awesomeness that these vehicles could put out, I was hooked! Just like that, I made my mind up that I had to have one. With my cousins help of course, we were able to pick up my 280z fairly quick. Happy to say that I got in a good couple years with the Z being my daily driver. During this time I began to go down a very dark path. Unfortunately the Z was not my priority during my "dark years". This lead to my car sitting at my dads for a good 6 to 7 years. Now that I am in a much better place in life, I was able to get the Z back in my possession. I decided that it would be best for the car to go straight to the shop and get some professional help. I have never claimed to be the best mechanic, so this seemed to be the best option. Unfortunately the shop had the car for close to a year. I have now paid a LARGE amount to get the car up and running like a top!! Now that I have the car back home I would like to start working on it myself. Again, I have always had help with the car so I feel very unworthy at the moment lol. This is where I would like your help. I will post all the pictures I have, in hopes that you all can point me in the right direction. Honestly I do not have many funds after paying for the shop bill, so I want to make it a point to do all the work myself that I can possibly handle. I have only had the car back for a few days now so I haven't been able to tag it due to the COVID mess going on. From the little bit I have been able to drive it, all seems to be running well! I do think that the next step I take will be upgrading the suspension and steering. Just from the couple short trips I have taken on the Z, its very obvious that the suspension is in need of some love. Happy that you all are here with your expert advice! Look forward to the responses to come!
  22. So I have a 1977 280z with a stock engine. The car runs and drives really well but anytime I come to a red light or stop sign it wants to die so I have to press the gas a little so it doesn’t die. Any ideas on that it is or what I should do? Thanks
  23. So I have a 1977 280z with a stock engine. The car runs and drives really well but anytime I come to a red light or stop sign it wants to die so I have to press the gas a little so it doesn’t die. Any ideas on that it is or what I should do? Thanks
  24. Hey guys I’m in the middle of getting my turbo setup together and need some feedback. Has anyone used this manifold? Also I’m gonna be using a Borg Warner 66/74 turbo, does anyone know what would be a good wastegate size?
  25. Alrighty, Ive got a stock 1978 280z and I'm currently installing an MSD 6A and Blaster 2 coil into the car. After reading any and all forum posts on the topic I came to the conclusion that I would need an MSD Tach Adapter 8920 in order for the MSD box to Communicate to the EFI by upping it to 12v. All my wires are in place and I'm getting a good strong spark. I put a voltmeter on the purple wire coming out of the MSD tach adapter and I'm getting 12v. Only problem is that I'm getting no fuel. It must not be communicating with the EFI somehow. Here's my Setup. MSD 6A: Heavy Red goes to battery + Heavy Black is going to battery - Red is going to Black wire with white strip (Ignition Key Wire) Orange is connected to blaster 2 coil + Black is connected to blaster 2 coil - White is not being used, I do not have a points system Violet and Green are connected to the Magnetic Pickups (I was told it didn't matter which way, I put green to green and violet to red) MSD Tach Adapter 8920: White goes to Tach Output on MSD 6a box Black is ground wire Red is connected to Black wire with white stripe (so two reds and black with white stripe all connected) Violet is connected to the blueish green wire that was connected to the coil negative terminal. Summary: I don't know what the **** I did wrong. Someone please tell me.
×
×
  • Create New...